2007 Saturn ION-2 Quad Coupe "remove fuel guage sending unit" Questions

...fuel guage suddenly does not work---the needle stays on "0"--- it sounds like your fuel level sending unit has gone bad. these are usually built into the fuel pump which will require ...

...worn or the float may even have a leak in it, the unit sends incorrect info to your guage. The solution is to empty your fuel tank, drop it from the vehicle, remove and replace the entire

fuel guage doesn't work fuel guage doesn't work Most common cause of this is a defective fuel level sending unit inside the gas tank. Remove the gas tank and replace the sending unit.

...fuel tank. With voltage confirmed, remove the unit and check for continuity at each end of the float arms travel .with a multimeter If the unit does not check good, replace the unit. Note: Sometimes ...

...fuel pump. Car runs absolutely fine, its just the fuel guage reads empty. please help and thank you in advance The fuel level sending unit is messed up, remove the sending unit and check

...you use more fuel from the tank, the guage will go from what is REALLY in the tank, to empty, at different times. Only solution is to remove the fuel tank, and replace the sending unit guage

fuel guage shows 3/4 full right after fillup It is most likely your fuel level sending unit has gone bad. It sits inside your fuel tank and uses a float similar to that uded in your toilet to tell the

...fuel in tank It is the sending unit, usually the veryable resister and arm. Remove and replace sending unit. It is , unfortunately, located inside of the fuel tank. To confirm gage operation reverse ...

fuel guage & water guage are not working properly the fuel guage reads ful then will go to empty after you drive it for awile - the water guage only goes up to a quater The gas tank sending unit ...

...fuel gauge. It is located in the gas tank. You will have to remove the tank to fix this. You can try banging on the tank, sometimes the float arm on it gets rusty and will get stuck in one position ...