...going to get it done for you. change spark plugs if they haven't been recently and check ignition coils or ignition coil pack, and spark plugs wires. Good ...
...have the V6. If so the firing order should be 1-4-2-5-3-6 if you have a distributor. If you have a coil pack which you should then see
2000 Mazda PU V6. replaced plugs, replaced wires, replaced coil pak and I still have my check engine light coming on and the code reads (misfire in cylinder #5). Any suggestions? May be a sensor in ...
Question about Mazda B3000
code 0304 change plugs and new spark plug wires still comes back on could be the coil
...CHANGED PLUGS WIRES ENGINE IDLES POORLY BUT STAYS IDLING THIS CODE KEEPS COMING UP,I SUSPECT A BAD COIL PACK It's very possible that you have either a vacuum leak on the intake runner to that ...
...sensor. (Mass Airflow sensor) If it still does not work you may have to have a mechanic check the coil or check your motor with a
...start Need more info. check fuel pressure it should be 8 psi need a tool for that.Check spark plugs coil pack wires. Check fuel cut off switch front passenger side under the dash. Check anti theft if ...
Question about Mazda B3000
...engine lite on...the determinator read code as a misfire on cylinder 6, installed new plugs,wires, coil pack, cleared code & returned to driving vehicle about 2 weeks passed turned on a/c while ...
...load is on engine. when put on a scanner a cylinder 5 misfire id detected. i replaced the ignition coil, plugs, and wires. what is the problem??? check compression on engine to see if valve issue ...
... No smoke or odor under the hood. Firing order checked and #6 wire was misfiring, but was replaced. Coil pack replaced with no positive results. have you had the catalytic converter checked at the ...
106 questions posted
Usually answered in minutes!
738 Questions
692 Questions
544 Questions
609 Questions
615 Questions