2007 Ford Fusion I4 SEL Sedan "turn light working" Questions

turn indicators are working and rear bulbs do not appear to be blown) The first thing i would check is the stop safety switch located under the brake pedal or brake pedal arm. If this piese has failed

chec k the fuse Usually when you turn a light on and another light goes off, you have a ground problem.I would check for grounds at the light sockets and power on the turn signal circuit at the switch

...light switch , this is located at the top of the brake pedal, disconnect the wire and turn the switchclockwise one full turn , reconnect the wire and check the lights , you may have to repeat this a ...

...turn signal not working, changed bulb and when hazzard lights on this one still does not work some possible causes are there could be a bad light socket,loss of power for the wire that operates the ...

turn on. Hazardous light's and brake light's still work. Tail light's still doesn't come on while driving. How do I fix this? very first thing make sure you have a good ground and that there clean,the

...the turn signal indicators to not "flash" while allowing the signals themselves to work, also that MAY cause the other dash lights/ gauges to light up or malfunction intermitantly. hope this

...light will not come on either in my 2010 ford fusion.#25 fuse is for these lights, but it is blown, and when I replace it, it blows again. Good morning Cletis When the fuse blows again, is it as soon ...

...TURN SWITCH BACK ON 20 SECONDS WATCH THE THEFT SECURITY LIGHT BLINKING.WHEN THEFT STOP BLINKING VECHICLE WILL CRANK.IF LIGHT STILL BLINKING.TRY FEW MORE TIMES KEY IN SWITCH ON POSITION FOR 20 ...

the rear tail lights don't work. turn signals and brake lights do work Bad bulbs ! There two stage!

light.If it also doesn't work with the hazards,you need to just turn the wires to the connectors and right at the connector in circles with the blinker on and see if it comes back at all.Please let me