2008 GMC Sierra 1500 2WD "change washer fluid pump" Questions

Ad

change it out? Thanks The horn is located just ahead of the washer fluid tank in the L.H. fender. Access is by removing the extra battery tray if you have one, and then the washer fluid tank. There is

Ad

Question about GMC Sierra 1500

1 Answer

...washer fluid won't pump out. fuses have been changed, fluid added, rear window dribbles fluid, nothing to the front. I don't hear the pump trying to spray. check to see when you operate washer switch ...

Ad

...fluid pump to work make sure you have washer fluid then check fuses and electrical connections to washer pump and hose connections if that doesent work you will need to change the washer pump good ...

Question about Cars & Trucks

1 Answer

taurus problems got no washer fluid coming out change washer pump, inspect lines from pump to "squirters" Check fuses, check washer switch. Check washer fluid level.

...change of the washer pump and washer fluid. Just from reading this I would think the washer pump is bad . But find the washer fluid bottle an pull it off the vehicle or find the wiring connector to ...

Question about GMC Sierra 1500

1 Answer

...washer bottle there should be an electrical plug and a rubber/plastic hose this is the pump they are attached too.disconnect the electrical connector and the hose.if you have fluid in the bottle have ...

change my windshield washer fluid... How often do i change my windshield washer fluid Your winshield washer fluid should not need to be replaced. If the resevoir looks contaminated you should rinse it

Question about GMC Sierra 1500

1 Answer

...change washer fluid reservoir the washer bottle is hard to remove so if you can use up the old fluid first, squirt some plain water in and pump that out then put in the new washer fluid. If you have ...

change. If it is not the fuse do you know what else it could be? They use same fuse, See if you hear it running when you depress the washer button. If not, check for power at the Dark Blue Wire at the

...change. The washer pump is inserted into a hole on the washer tank itself. It is an interference fit so it will pop out. If you have significant amount of fluid in the tank it will leak out of the ...

Not finding what you are looking for?
Cars & Trucks Logo

132 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...