2007 Dodge Nitro R/T New Cars "serpentine belt slipped put back" Questions

...serpentine belt.The timing belt is inside the engine and should not need replacing unless the engine is running REAL bad.If you are talking about the serpentine belt,a rubber belt which the engine ...

...serpentine belt keeps slipping off I just finished replacing my serpentine belt on a 1998 ford escort zx2 and in less than a day the belt slipped right off. I had a very hard time getting the tension ...

...serpentine belt back on my 2001 ford escort zx2 it has a spring loaded tensioner pulley. some use a bolt that you put a wrench on and pry back to release tension to slip belt on. others just use a ...

serpentine belt back onto a 1999 lincoln continental? we can't figure out how to put slack in the belt to get it back on the alternator. there is a belt tensioner pulley you must lever back to produce

...serpentine belt yesterday, after starting the car realized that the steering wasnt working, checked under the hood and the new serpentine belt is now broken, looks like it snapped Maybe one of the ...

serpentine belt slipped My serpentine belt came off the car and I need the diagram to put it back on check under the hood most cars have a digram under the hood some place

serpentine belt slips off idler pulley I went to start my 1994 5.7L with A/C suburban the other day and the serpentine belt slipped off of the idler pulley. I put it back on and tried to start it ...

...serpentine belt on I installed a brand new tension pulley, loosened the tension, but still can't quite slip the belt on. I was very frustrated, to say the least. Try using a 1/2 inch socket on your ...

...serpentine belt after removing to replace water pump. Don't know how to put serpentine belt back on. Had to remove to replace water pump. Hook the belt back into place as best as you can, then get a ...

...serpentine belt back on it slip off while i was puting belt dresser spray on it.thank you if anyone can tell me how to start If the belt slips of the tensioner is weak. If the tensioner can be moved ...