...igniter tips and where the spark connects to the burner head. The ignitors get a buildup on them that doesn't allow a clean bright spark. If this doesn't work then you will need to replace your spark ...
that when it calls for heat it glows bright red and then gas comes in the tube and it lights it up. if the igniter is not hot enough it will not light the gas. that means u need to replace the igniter
igniter side of connector,.if no continuity replace..Hint when installing new ignitor do not touch the heating end of it oils from your body will create a hot spot and shorten the life of the ignitor.
no heat in EH5 dryier no heat do you get heat when you first start the dryer ? if you do i would replace the coils and check venting , if not i would check the igniter to see if it is broken
...igniter does not reach the correct amp draw it may allow the gas valve to partially open or not open at all. The igniters are inexpensive and easy to replace. There is a video at ...
Cabrio model WGD6400SW gas dryer runs but not heating at all. have cleaned it.. still no heat. This happened the same day we had a service tech look at our cabrio washer. Have not had them for 3.5 yrs
...should have continuity between the two contacts. If not, then you need to replace the flame sensor. The sensors are usually located close by the igniter so are easily visible. Hope this helps... ...
cabrio dryer not producing heat The pilot light is ignited by a automatic ignitor. It will need a new replacement to operate the heat to work
132 questions posted
Usually answered in minutes!
1,123 Questions
940 Questions
790 Questions
215 Questions