dryer top when pressing dryer top or placing basket on dryer top drum seems to be hitting top Sounds like the bearing seals may be getting worn. You will need to open the top of the dryer and look for
How do you get the top off a kenmore dryer I can't get the to top off my Kenmore dryer remove screws in back, slide top back about four inches, left off.
...top of the dryer by removing the four screws in the back. the entire top should slide forward an inch allow you to lift and pivot the top off to the side. it will not come off entirely because of ...
...top of the dryer has hinges and should rotate up, but how do you get the top to come up so that I can look at the baffle. The baffle is currently at the top of the dryer in it's rotation and if I can ...
top of dryer how to get top off of dryer?? remove 2 screws near the floor on the front cover then raise up front cover till the clips near the top give way,then you can remove screws for top cover
...top of dryer. Remove screws that are attached to clamps at back of dryer that hold top on. Top should now slid forward for you to remove. At the top of front cover on the backside of it, you need to ...
...top of my dryer getting so hot? Check the moisture vent for restrictions from the dryer to where it exits outside. If it is restricted dryer will overheat. Also thermostat could be faulty causing ...
top. Taking the front loose to remove from dryer. There are 2 screws inside at each edge near the top to get the front loose after getting the top up. Pull the top of the front forward and lift it off
...top. Swing dryer front to the side. (you don't have to disconnect the door switch wires) Remove plastic tub block at top center of opening. Release belt. Pull up on back of drum, then pull drum out ...
414 questions posted
Usually answered in minutes!
1,123 Questions
940 Questions
790 Questions
215 Questions
219 Questions