...zone 2 hook up to external amplifier then to speaker selector to outdoor speakers? go into your amp settings menu then to speaker settings,set zone 2 on and main on, turn up the volume for zone 2 ...
...explain? How do I get all 5 to work with the primary zone and Zone 2 to just go to the speaker selector? Turn Zone 2 off. Speaker selector is made through pressing the dial below the volume ...
...Zone 2. 1. Set the remote control selector to AMP. Selector is on side of remote. 2. Press the Set Menu Button. 3. Arrow down to Manual Setup. 4. Press the Enter button. 5. Arrow to the Sound Menu ...
Question about Yamaha Audio Players & Recorders
...ZONE 2 in this amplifier 1. press the input selector button A or B to select the source component you want to setup. 2. press and hold LEARN (on remote) button about 3 seconds by using a boll pen or ...
Question about Denon Audio Players & Recorders
...not reconnect the speakers to zone 2 speaker connections and make sure you do not have more than 4 pair of speakers with impedence matching volume controls or a impedence matching speaker selector ...
Question about Yamaha Audio Players & Recorders
...Zone 2 selector to DVD or TV and still get nothing. Any suggestions would be appreciated. Thanks. Had same problem. A and B speakers are basically connected together, and there is no way to get the ...
...Zone 2...where do I connect the speaker wire to the selector? Thank you! DD Hi Mdensonjr, I see that this was posted in 2011 but well the speaker selector would be connected to the Front speaker ...
...selector from Russound that supports 2 sets of 8 ohm speakers on Zone 2 and the receiver shuts down at about 74 dcbs and gets very hot. Checked the jumpers on the selector and they are set at 8ohms. ...
...selector from Russound that supports 2 sets of 8 ohm speakers on Zone 2 and the receiver shuts down at about 74 dcbs and gets very hot. Checked the jumpers on the selector and they are set at 8ohms. ...
zone, I have a Sonance Speaker Selector that allows up to 4 speakers in different rooms to operate independantly. This is hooked up to the Back Speaker/Amp Assign part of the receiver. By default the
102 questions posted
Usually answered in minutes!
135 Questions
96 Questions
101 Questions
82 Questions
73 Questions