Nikon N2020 35mm SLR Camera "insert film" Questions

insert film My Nikon N2020 will not open in the back to insert the film. I tried rewinding it and the back is supposed to pop open but it is not opening. life up on manual film rewinder to release the

...into half. Half develop and half not. what the cause of it?? thanks Might be film coming loose when inserting in loading spool and skipping when winding forward after making a shot. Could try bending ...

...Insert the film canister with the hole side (not the projection) down. Insert the spool of the camera into this hole and slide the canister inside the chamber. Now pull the film out slightly so that ...

...insert a new roll of film, I pull out enough film so that it should begin to load when I close the door. So I close the film door and I hear a noise but the film never advances to the ready position ...

...film out of the roll, insert that into the slot on the roller spindle far enough for it to wrap once, close the back of the camera, and then power it up. It will start to wind to the first photo ...

detects film and loads automatically, insert any expired film cassette, or badly developed film and roll it back into cassette. 3). send it for service if either one or both gives you an answer of "N"

...When loading the film you must insert the film into the receiving spool by hand while the camera back is open. Make sure to advance the start enough so that the spool will 'stick' to the

...went completely slack. Can you tell me why I'd did this please? And how can I fix it. Looks like the film snapped out of the cranking wheel. You'd have to open the film door and insert the film

For the first time I used black & white film in my nikon F80.The display stays on number one, frame.I don"t know if the film has wound on. Thanks. try inserting the film again.

I insert film and when the back cover is closed it rewinds film... When loading film, pull it all the way to the receiving spool before closing the back.