Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum "2 spray" Questions

What causes a carpet cleaner to stop spraying water? It will not spray out the water Can only think of 2 things - pump or clogged spray nozzles. Regards, Dennis

...2 years old but hasn't worked for a year. It's quit spraying water normally but sometimes would work in water only mode. Now I borrowed a friends and it worked great the first time, now it doesn't ...

...spray solution if its not spraying solution there are two possible problems,1. the solution carrying line that runs from the unit along inside the hose could be blocked.2.there mite be a clog ...

2-in-1 tank is placed properly, your unit's pump may have lost prime, to check this turn your unit's power off and hold spray trigger for 30 seconds. Turn the machine back on and check the spray flow.

...2 spray nozzles and blow thru them to see if they were clogged. You could try running a mix of vinegar and water, sometimes that will open up any clogs. Is the knob on the floor setting? After the ...

...spray I had same problem. Remove all fluid from machine, I used a wet dry vac. As someone else said unscrew the 2 screws that hold the filter basket. Take out the filter basket and clean thoroughly. ...

...proheat 2x (used 2 times successfully), no longer sprays water when I press the handle button? Any suggestions? Thanks will not spray through the floor main cleaner but will through hand held ...

Why does carpet cleaner not spray out water through hand tools or floor unit Can only think of 2 things - pump or clogged spray nozzles. Regards. Dennis

spray water and then pick up Take the water tank off, you should see 2 spraying nozzles. You need to get to these and clear them out with a needle or something. Did the trick for me. Could also be the

...1/2 SECOND AND WHEN I RELEASE BUTTON AND WAINT ABOUT A SECOND IT WILL AGAIN SPRAY ABOUT A 1/2 SECOND WHAT DO I LOOK FOR Something is obviously clogged. Check filters, tubing, etc. for