Wahl Designer 6 (8355100) "lever clippers" Questions

clippers. Motor turns on but there is no oscillating of blade. Is the blade lever supposed to move? The blade driving lever is certainly supposed to move, if it isn't then take the cover off and check

...Andis A5 or did you mean Oster A5 Clipper, if this clipper is A5 Clipper, You need to check the Lever for wear, The front of the Lever show wear on both side, Like white color and is not squad ...

...and clean them well with a Oster spray and then oil them. I would recommend cool lube. If the power lever (the tab that moves the blade back and forth) is not moving with the blade off, chances are ...

...sure about the nature of you question. Firstly if you mean, position the comb (with the adjusting lever on your clipper because your blades wont work, then:) 1. If you move the comb downwards using ...

...moves. Oster A-5 Turbo I have taken the clipper appart. There is a lot play around the pin the the lever pivots on. This pin moves alot. Is this normal? If not how do you identily this pin and how

Blades on razor are not moving Disconnect the blade and ensure the drive Lever is moving if it is apply pressure to the lever and make sure it still moves. There could be a problem with the Gear Wheel

lever on the clippers locates into the cutter of the clipper blade its only a matter of lining the lever up with the slot in the top blade which you can slide from side to side by hand. Please keep in

If you have what about the clippers try replacing the Lever which is located at the drive end and goes from side to side. There are different cutters for these clippers, prehaps you need a courser set

clippers are slow and vibrating noisily even without a blade attache. Any ideas what could be wrong with them please as I have a dog only half clipped at the moment. Thanks If the nylon lever (the tab

clippers wont stay still, everytime i cut on the clipper the adjuster on the side wiggles and moves to the top..how do i fix this Take the upper blade off of the clipper, there will be four (4) screws