Power Acoustik A3000DB Car Audio Amplifier "remote light amp" Questions

Ad

Question about Kicker Car Audio & Video

1 Answer

...fuse possible? have you checked? traced all voltage?take and disconnect remote wire from amp and make short wire from remote to 12v if green light works then u may have bad remote wire or blown

Ad

Question about Car Audio & Video

1 Answer

...light goes off If the protection LED lights only after the remote voltage is applied (head unit is switched on), the amplifier likely has shorted output transistors. If the protection LED remains lit ...

Ad

Question about Kicker Car Audio & Video

2 Answers

light listed as a potential problem in the troubleshoot section. With your multimeter set to DC volts, the black meter lead on the ground terminal of the amp and the head unit on (so the amp will have

Question about Car Audio & Video

1 Answer

...light from turning off with the car. If you don't have a remote power or power antenna output on your deck, I would invest in a new one. However, it is relatively easy to find a remote and a constant ...

Question about Sony Car Audio & Video

1 Answer

...light but thre is power getting to the amp explain in better details what is happening if the amp wont power up jump a short wire from the positive on the amp to the remote if this powers it up check ...

remote blue wire stereo & amp ) the power light on the amplifier goes on, after 5 seconds shuts off, i had run a 10 gauge wire directly to the 12 v battery in a honda civic. also if i bridge the power

Question about Jensen Car Audio & Video

1 Answer

...light does not turn on. ok remote does not mean the clicker to ur tv its the wire that leads from the back of ur deck to the amp itself to tell the amp when its cool to turn on n off either blue or ...

...light. I've had many times thinking my remote was good but found it not by connecting the 12volt source to both remote and positive for confirmation. Ground sources are often over seen as a problem ...

...remote turn-on terminal of the amp to make it switch off. This is generally done by connecting the remote turn-on terminal to the head unit's power antenna or system control terminal. When the head ...

Question about MTX Car Audio & Video

1 Answer

...remote of amp. is not a ground it is a pos.+ 12 vlts look the back of your car stereo red the remote and conect to remote of the amp. if no sign remote of the car stereo conect to the 12 vlts of your ...

Not finding what you are looking for?
Power Acoustik A3000DB Car Audio Amplifier Logo

23 questions posted

Ask a Question

Usually answered in minutes!

Top Power Acoustik Car Audio & Video Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Power Acoustik Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...