Whirlpool LEQ8858J Dryer "limiter" Questions

how would you know high limit thermostat is defective. need to know before ordering part Hi, you'll need a ohm tester (multi-tester) you will have to remove / disconnect wires from hi-limit, in normal

EDV code e66 Check Outlet Thermal Limiter for continuity. For Gas Model, also check Inlet Thermal Limiter for continuity. If Thermal Limiter is open, check for evidence of high temperature event and ...

...417.90802990 which heats up but will not run..we had this problem before and replaced the themal limiter and it worked fine for about 1 month..same problem..replaced the thermal limiter and it ...

Thermal limiter stops dryer; replaced multiple times. Dryer dead. I have replaced the thermostat, the safety thermostat and the thermal limiter in October 2008 on my Frigidaire dryer FSG747GC. I have ...

ever limit switch i changed in my Weatherking furnace, it breaks the switch, what could cause this? I have a Weatherking and for some reason the furnace stopped working today, so i go check the ...

the high limit thermal switch on heater burns out. changed the thermal switch. the heat worked for a minute or two then it stopped working. This switch is on the surface of the heating element.The ...

Our Kenmore 87042 thermal limited tripped. Can we Our Kenmore 87042 thermal limiter tripped. Can we repair/replace ourselves. If so how? This is repairable. Most dryers have a thermal fuse, or limiter

...Afternoon Friend, I understand that you are trying to test the high limit thermostat, or thermal limiter, on your Frigidaire dryer, model# GLER642A. Typically, this is not a do it yourself job. ...

Frigidaire dryer overheats, already checked venting I recently replaced the thermal limiter on my frigidaire feq1442 es dryer, cleaned the entire unit, and bought a new vent duct. Dryer still ...

...of either a power surge opening the circuit OR that your furnance has another problem and the limiter opened because of it.  You can buy and replace the limit circuit, but if it opens