whirlpool dryer won't start stays on sensing Try one of these diagnostic repair videos on YouTube: https://www.youtube.com/results?q=Whirlpool+dryer+won%27t+start+stays+on+sensing
stays on sensing I set everything and click start, it goes to sensing and the drum turns a few times with a loud noise then stops. Stays on sensing, timer will go down but thats it. I just changed the
I have a Kenmore 500 series dryer, model number 110.79522800 that will note completely dry clothes. It seems like it doesn't run long enough, heat high enough or a combination of both. What can I do ...
My Kenmore elite dryer mod 110 62932100 won't stay running. Some dryers have a moisture sensing strip in the drum area of the dryer. If this sensor gets coated with an insulator, like silicon from the
Question about Whirlpool Dryers
...Sensing position, but rather goes immediately to Wet, and the clothes are not drying. The burner is operating, however, it stays on for only 8 to 10 seconds at a time, and not very often, so the ...
Question about Whirlpool Dryers
...stays at the sensing mode whether the clothes are either wet or dry. Will this cause the dryer not to get hot? What you will need to do is remove the front lower panel ..Test the thermal fuse with a ...
Question about LG Dryers
My lg dryer wasn't heating and I cleaned out very clogged vent. Now that works but the flow sense light is still staying on? Take vent off back of your dryer and dry a load. See if flow sense goes off
The "sensing" button stays on The "sensing" button stays on and beeps and the dryer will not start clean the sensor, it is located underneath the lint trap, be gently as not to break it
Question about Whirlpool Dryers
...10 min. but goes right back to sensing mode. Any suggestions? Try one of these diagnostic repair videos on YouTube: ...
64 questions posted
Usually answered in minutes!
1,123 Questions
940 Questions
790 Questions
215 Questions