Whirlpool GEQ9800L Electric Dryer "stoped getting hot" Questions

Mde4000ayw  It runs and hot air comes out the exhaust but clothes take for ever to dry. Help? Sounds like you may have lint stoping up the vents it could still get some hot air out but not enough

...hot what could be the problem this is likley to be one of the heating elements has stoped working on you it may even be that the outlet pipe is blocked witch would make the heater thermostat switch ...

...hot but the push botten won't start, was working fine then just stoped tryed every thing maybe its the fuse, but were is it? Someone Help do u mean that the drum wont go round if so then it could be ...

...stoped heating heater element replaced on 11/21/14. Worked 2 loads stopped heating, replaced switch, worked 3 loads stopped heating replaced thermostats. Did Authorized LG repair man, 3 times same ...

...getting voltage to the wires that lead to the coils. I thought maybe the thermostat or the heating element were the problem. Now, I'm tolad that a bad timer may be the problem. Since the timer is a ...

hot and causes the breaker to trip. When I take the lint catcher out and prop open the lint catcher door, it runs longer before causing the breaker to trip. Can I run it without using the lint catcher

...stoped up and the fan blade can't turn. Also causes it to get too hot and could cause a fire. Last take the belt off and remove the drum . Run the motor for a short time with nothing hooked to it ...

...this morning and just stoped mid cycle. More than likely the operating coils are getting hot and opening. If it heats a little tomorrow after cooling back down but quits again replace these

...getting too hot & causing a fire if it is bad something caused it to get too hot I would check all the other thermostats & also be sure the vents are not stoped up & not letting the heat ...

...stoped working thats why its not getting very hot its that or the heating coil/s are broken,,also check the air vents at the back are not blocked up if so its not getting any air to it,,, then go out ...