GE DRSR483EGWW Dryer "wall start" Questions

...wall is normal. when pressing the start button, it made a sound that showed it tried to start. Immediately, it stopped. Even though the power is normal on the wall, it does not work anymore. Sounds ...

I have a Kenmore 90 series dryer, it started sparking on the plug that goes on the wall, what could it be? thanks You have a loose connection in the wall plug would be my first guess and is shorting ...

...the wall switch? They're currently available on Amazon. Search for your model number. It could be the receiver in the fan, which can also be replaced. But the wall switch is an easier place to

...start with the basics and check the voltage at the wall recepticle. If this is the HE4 units made by Whirlpool for Kenmore, the first three digits of the model number could be 110. Let me know if you ...

Went to turn dryer on and it wouldn't start. Replaced starter switch and still doesn't work. It's a frigidaire galaxy..model number GLER331AS2 your plug in wall has burnt up replace plug in wall.

start tracing behind walls. Is any light fixture or device still hooked up anywhere on this circuit? If so, they need to be individually disconnected first, to eliminate them as the point of shorting.

...start or click at all. ,Got power to the wall outlet (240v) Do you have t 220 at the wall. Check your wiring from the plug to the back of the dryer and then inside. I thnk your problem is there. Your ...

...start to turn Try switching off at the power and unplugging from the wall. Then plug back in and switch on and then try again to dry. sometimes its like the whole thing needs re-booting. and ...

...can use existing wall receptacle ? I think you are asking if you can change the cord from 220 amp to 110 amp so you can use a 110 wall receptacle...NO you cannot not.It would also probably start a ...

start agian it trips. It is getting warm inside and drum is going round. Any ideas what the cause could be. Thanks its not venting the hot air as well as it should,have you got it hard back to a wall?