I think the power head is clogged with pine needles. The carpet head is not picking up. How do I open it to clean it out? Make sure you have suction at the end of the hose. If not, the clog is most ...
...in the sound of the motor or a reduction in the spinning action in the Dirt Container, check for clogs. Unplug cleaner from electrical outlet. Empty Dirt Container. Check Upper Tank and Louvers
I am experiencing some (not complete) loss of sunction when I use the hose Possibilities: Dirty filter, needs cleaned or replaced. Partially clogged hose, needs cleared. Detach hose from tank and drop
35922, sounds like there is a clog , have cleared hoses, put new bag in loss of suction, still hear loud clogged noise near rear vent hole Try putting the vacuum hose end into vent hole while running.
...the hole where the hose was connected. Otherwise, tap the hose on the floor until the chunks (clogs) fall out. I've run bailing wire through mine to unclog places I couldn't reach with my ...
model 116 hose clog? My old cannister model 116 followed with numbers 2839580 marked Kenmore 3.9 with power-mate, worked fine until the bag got overly full. I have changed the bag, cleaned the filter,
...get it to move. How to I remove it to undo the clog? must disassemble the airways to access some clogs. ...
...less than 2 minutes later it's clogged again in the same area! The canister is not full when it clogs, I clean it out every time I use it and it clogs right off. Is there anything I can do to
Dyson DC 24 is clogged, not suctioning. How can I check the tubes for a clog? I removed the flexible tube sections and blew compressed air in reverse flow path to remove the clog. however I have ...
dyson clogs at main intake Dyson clogs at main intake . Cleaned entire unit, it appears to work fine and within 15 minutes it is clogged again. check both of your filters they are probably clogged ...
104 questions posted
Usually answered in minutes!
157 Questions
154 Questions
80 Questions
71 Questions
49 Questions