Keurig B70 Coffee Maker "sometimes grounds cup" Questions

sometimes quite heavily. The cap on the dispenser cup is securely on. the water is going into the dispenser and bubbling back up through the hole in the top of the dispenser allowing coffee grounds to

...sometimes gets dirty. Coffee grounds are in it and cause the water to go over the top and wash coffee past the k-cup into your coffee cup. You can use a paperclip to clean out the needle. 2. There is ...

...Sometimes it makes one cup, and skips. Other times, I grind the equivalent of 8 cups of coffee without any cups of coffee coming out. HI When a machine grinds but doesn't make any coffee there are a ...

...holder and inspecting the bottom hole opening. This is where the bottom of the K-cup holder would go through. Sometimes grounds can rest on that edge and fall into the coffee. I hope I could

...sometimes doesn't give me a full cup as per the setting. 2. It was hardly working and I descaled with vinegar - it worked while I cycled the vinegar through but then quit working entirely If your ...

...into the holes of the strainer cup. This can also slow down the brewing process. If you grind a batch too fine, you can sometimes get a way with mixing it with a batch of coarse or under-ground

...grounds into the cup and water around the machine. Could be a couple of things. Clean out the channels of the coffee machine. Clean out the upper pick that pierces the K-cup. Sometimes this can start ...

grounds escape the K-cups and get trapped in the needles. You can force the machine to produce more water sometimes by plugging off the return line to the reservoir with a gloved finger. The return is

grounds than usual, but sometimes all lokks perfectly normal inside the brew group. I have changed the o-ring at the top of the main piston (red o-ring) but the problem remains. Any thoughts?? Thanks,

...sometimes w/ coffee and grounds I soaked all parts in vinegar and water, still overflows and grounds mix in w/ coffee? mcdevito75 here, Best Bet Look for an appliance repair shop in your area. Also ...