Magnum 257 CB Radio "chassis need grounded" Questions

Ad

Question about Cherokee Radio Communications

3 Answers

chassis will read 0 ohms. Hope this be of some help/idea. Pls post back how things turn up or should you need additional information. Good luck and kind regards. If you never fixed your mic and its an

Ad

...need to ground the antenna any ideas thank I would start there and ground the antenna to the chassis. Volvos' are made of fiberglass and fiberglass has no ground plane so you have to create one by ...

Ad

Question about Midland Radio Communications

1 Answer

...need to have the attena mounted to the bike somewhere? Make sure you run the CB directly to the battery. What you are hearing is the alternator whining. Even then sometimes a low pass filter may be ...

...need to ground the chasis i'm trying to due a standard tune up. the radio won't transmit with the covers off. it will sometimes and sometimes it won't. this is a 2011 model ...

Question about Ranger Radio Communications

1 Answer

...chassis witch is both the same lenght have anything to do with it???? THANK YOU note installed in 2002 t900 kenworth Hi my name is John. Welcome to FixYa. You need to ground it to the negative (-) on ...

Question about Cobra Radio Communications

1 Answer

need to make sure your battery on the neg - side has a ground wire is running from battery to chassis. and on a cobra 29 you should see a switch that say off anl nb. when you see that one switch it up

Question about Galaxy Radios Radio Communications

1 Answer

...chassis. any thoughts? Well,some meters are set different than others,to see what is going on,you need a good WATT-SWR meter,but that is not a bad reading of SWR, you can get one at Radio Shack. You ...

Question about Magnum Radio Communications

3 Answers

...need to know what would be the best way to hook the wiring up on this in a vehicle to get the most power out of it. And what kind of antenna would be best? Thanks. Hi, On most mobile communications ...

Question about Cobra Radio Communications

1 Answer

need to retune the antenna system if the coax has not been kinked or damaged.  If you simply moved it over from the old rig, the antenna was tuned to that layout and the groundplane was the shell

Question about Cobra Radio Communications

1 Answer

chassis; and/or 5. 3 terminal voltage regulator (780X) or a zener diode. Alternately, a wire (after the switch) might have been grounded. Hope this be of some help/idea. Post back how things turned up

Not finding what you are looking for?
Radio Communications Logo

68 questions posted

Ask a Question

Usually answered in minutes!

Top Magnum Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1672 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Magnum Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...