Toshiba 42HM66 42" Projection HDTV "new lamp" Questions

new lamp assembly, reverse the process. If a new lamp without assembly, change lamps. CAREFUL. No fingerprints on the new lamp. The oil in the fingerprints will shorten the life of the new lamp. Reset

New Lamp or not New Lamp Ok, I it looks as if my lamp burnt out for a second time. I ordered a new lamp and installed it. It didn't work, just a constant flashing Green Light. I measure the lamp leads

...new lamp. that will reset the buld to new. I understand that the fuse will blow right after a new lamp is installed. It will reset the counter to 0. Hope this helps Ron Hi. I had exactly the same ...

...new lamp but same problem exists. Any advice would be greatly appreciated thanks Did you use an original Sony lamp? If so, I would say that the problem lies with your lamp ballast, or lamp power ...

...new lamp! Clean Lamp Compartment. Dust gets everywhere and while you have the projector open, use a soft cloth to remove any loose dust from the lamp compartment. Insert New Lamp Assembly. reconnect ...

...new lamp in 12hrs later red light was on lamp had black around it why new lamp new lamp may have gone bad. was this the recommended lamp for the unit. Most Mitsubishi units must have the correct ...

...new lamp, installed new lamp but still get the flashing red then orange lamp indicator, I've tried the system reset button on the front of the tv but no luck. I then removed inspected and reinstalled ...

...and you have to replace the lamp with a new lamp. When you install the new lamp dont touch the glass lens part at the front of lamp or the oil from your finger will burn the new lamp and it wont

...new lamp installed? Or the lamp is working but the Red lamp still blinking? Reset the lamp timer after the lamp is installed? Description of product: Replacement RPTV projector lamp HITACHI 50C10 ...

...new lamp out of the box. Do not touch the glass portion of the new lamp. ✍ Do not shake the lamp. Vibration can damage the lamp or shorten its life. ✍ Avoid touching the front ...