...a car with an 8disc auto changer in,the product being a panosonic CX-DP88ON and i am not able to play my cds init. It does play but starts jumping and skiping through my cds as soon as i start to ...
Question about Tools & Hardware - Others
...that indoor temp is 18.5 and furnace is blowing cold air and never reaches 22. Sometimes if you play around with settings it blows hot air and then stops again and continues to blow cold air. ...
Question about Honda Tools & Hardware - Others
...installed Saab CD changer is not functioning properly. It started by listing "Error 60" on the display whenever I selected a CD to play. After looking at the changer and noticing that the magazine ...
Question about Tecumseh Tools & Hardware - Others
...RECOIL ALL THE WAY BACK INTO ENGINE. RECOILS ABOUT HALF WAY. WHAT SHOULD I DO TO FIX THIS PROBLEM? Play with it ... My Tecumseh does the same. The little catches inside dont always catch like they ...
Question about Poulan Tools & Hardware - Others
What is H and L carb setting for a Poulan P3314 It is a new chain saw just about 2hrs runing time i try to get a better performance by playing with L and H adjustment screw and the idle screw and i ...
manual Can I jump a car while the unit is charging? Just to play it safe I would NOT jump start while charging, It sounds like one would be putting out too much volts/amps ETC and could damage or the ...
...inspection followed by a test run. Begin by unplugging it and then removing the blades. Check the play in the drum, and the clearances to be sure that the drum is still centered. It could be that a ...
...list mrfixit. The likely problem is your jets in the carb. It sounds like it is running to rich. Play with the little screw on the carb a bit. I think you would have to turn it in a bit. Wish you ...
10 questions posted
Usually answered in minutes!
11 Questions
12 Questions
9 Questions