Magnum S9 Base CB Radio "change mic" Questions

...mic..no change...new antenna...still no change..could a soldered connection have broken on the circuit board..? my cobra 29 recieves but won't transmit..needle don't move when I key the ...

...change "MIC" to a factory,or turn back Mic gain. Mic can short out or may have too much gain(power mics). Use standard dead Mic that was designed for radio. If that does not help,it may be inside ...

...change mic ,maybe the problem are in this mic ,second if the mic is ok verify all capacitors in the modulation near of this ic ,if all are ok change the modulation ic and change it, i hope this help ...

...are on the switch and mic element.. mics can be rewired and no one told you the colors could have changed FYI.. Pin #1 ~ Audio Pin #2 ~ Shield Pin #3 ~ Receive Pin #4 ~ Switch Wire Pin #5 ~

When I key up the transmit light changes but there is NO audio output and no swing on the meter. When I let go of the mic, the Roger Beep beeps through fine....loud and clear and bounces the output ...

cobra gtl 148 seems to have no power til i push on mic connecter. changed mic , opened up and it looks great.tightened up female connecters that the mic plugs into at mic connection.still radio ...

...change the chanels from the mic so long as I can use the power mic im ok with it. Thanks Charlie according to the schematic I just looked at the mic for this radio is a 5 pin. As long as it is a plug ...

change your Mic. Mine done the same thing when Mic wires shorted together inside of the handpiece. Also, when it doesn't match the Ohm impedence. you can buy a replacement Mic at www.copperelectronics

...fallen out of site into the body somewhere. thats why I said install your own. You said its a power mic and the red light doesn't come on? ....if not it needs a battery inside change or add a

...Why they The Mic on my galaxy xcover don't work. Why they can't hear me? Change mics first the. Troubleshoot it by seeing if a buddy can hear u alot of times there are smarty s that wont ...