Uniden BC340CRS Base Scanner "open squelch" Questions

...open squelch Rotate the knob counter clockwise to close the squelch. If this does not work, remove the knob by pulling it off gently and make sure the "pot" is turning with the knob. Verify the knob ...

Squelch is open all the time When powering up the scanner, the squelch is open all the time. On digital channels, you hear a steady "burst" of squelch as the scanner is scanning. On a conventional ...

ubc330crs squelch not working the squelch is always open unit will not scann and constant hash every thing elce ok Check in the menu? for a squelch on / off function.

...squelch is stuck wide open and will not scan. Sticks on one channel with constant static. provided you turned the squelch know and it didnt help, i would trace back from the squelch control to the ...

...squelch control even if you turn the knob, still is like open channel... is it possible for the knob to lose the resistance effect or is it a circuit problem??? If your scanner is open squelched on ...

...squelch off. It acts like it is stuck open and no matter which way you turn the squelch it wont shut off. This is an internal problem that can only be repaired by a technician familiar with Bearcat ...

...scan frequencies while the squelch is open you will need to open it and ajust VR1 VR2 please check these use a plastic screwdriver when ajusting be carefull not to damage any of the components ...

squelch out stays silent most of the time. Once in a great while a channel would open then go silent for along time. Are you hearing any communications at all? Sounds to me like someone has programmed

...squelch open. Here's an instruction manual (with how-to) for your scanner. Seems easy. Also make sure you have a good antenna so you can pick up signals. ...

...squelch and volume controls. You may also have to open the unit and identify what they call 'pots' or little trimmers to clean and adjust. Set your squelch control at mid range and with an insulated ...