...change the inputs on the tv? If you have the remote, there should be an input or source button it? Also, check the buttons on the TV for an input/source button. If there isn't one on the TV buttons, ...
Question about RCA Televison & Video
...Input Problems - TV Not Showing Image - TV Repair ... ? 2:34 https://www.youtube.com/watch?v=ZtaUPX1tHP0 May 26, 2015 - Uploaded by ShopJimmy.com Basic troubleshooting and replacement tips for HDMI ...
Question about RCA Televison & Video
...change to HDMI? Unfortunately, the L32WD22 doesn't have an Input button on the front panel of the TV. You need a remote control that matches the Input code for the remote. Here's one link to a remote ...
Question about Televison & Video
...anywhere. Yellow red and white plugs. Plug then in the output from the vcr and the inputs on the TV. Just plug yellow to yellow, red to red ect. Then change you video source on your TV to that
...change the input source to tuner, go to the remote, hit the source button until it says "tuner", then go to menu, page to the "picture" settings, and page through to color, to adjust the color, You ...
...change the source (av1av2hdmietc)What can I do? Ouch my RCA does the same thing. Perfect picture but no sound and no analog channels. The only inputs the work are HDMI 1,2, and 3 so I have been using ...
...change the input to show the device plugged into the front of the TV? There is no source button. The front of the tv only has Menu,volume, channel, and power. When u manually go thru the channels the ...
...change the input on your T.V. to what ever video source you got the wires in. If your tuner allows you to hook up a video source to it, you can just hook it up to the tuner and run the DVD player off ...
...change input to view dvd but no input button on remote. Is there an alternative Look for a "source" button, if you do not find one, just try scrolling through the channels as some TV sets will cycle ...
input source. First try cycling through the inputs i.e. HDMI 1/HDMI2/CABLE/VGA/RCA etc. next try changing the cable you are using. It may be bad. Outside of that, either the input port has gone bad on
195 questions posted
Usually answered in minutes!
469 Questions
238 Questions
97 Questions
100 Questions
66 Questions