suction, and its not taking it to the canister. Any suggestions? Take the Hose out bcack run the water hose thru it full blast to unclog it then leave it hanging to dirty all the water left inside out
thru the head of my shark steam mop...I turned it off and pressed the release button to remove the head and it all shot out in a big blast...what can I do to make it able to get to the mop pad again??
...thru filter or it will pop off.I placed filter against exhaust end of shop-vac ( NOT SUCTION END) untill I got air coming out. Hi there, When replacing the post-motor filter after washing it, please ...
thru the hoses again to assure blockage cleared. 8. Button unit up. 9. With the clear bezel off and the red rotor exposed, plug unit in, soap and water supplies in place, switch on power and pull soap
thru the hoses again to assure blockage cleared. 8. Button unit up. 9. With the clear bezel off and the red rotor exposed, plug unit in, soap and water supplies in place, switch on power and pull soap
thru the hoses again to assure blockage cleared. 8. Button unit up. 9. With the clear bezel off and the red rotor exposed, plug unit in, soap and water supplies in place, switch on power and pull soap
288 questions posted
Usually answered in minutes!
432 Questions
390 Questions
261 Questions
302 Questions
