will not respond to remote is the remote your using is the original one....well try to check the battery and it's terminal sometimes it needed to be clean...check the infra red LED of the remote using
...responding to my remote control . another word my t.v does not read my remote control at all. can someone help me to fix my remote ? U already change the remote control for brand new batteries ...
Question about Sharp LC Televison & Video
sharp lc-46d82u i can not turn on the tv ,the green light is on, press the power button and remote no respond. how fix? check ur power source,change batteries in ur remote.Do all that same prob.ur ...
Question about Sharp LC Televison & Video
the battery is brand new on my remote and the red light flashes when I push button but the tv doesn't respond. Is it one of hose remote that needs to be programmed for your TV or original reamote? ...
The TV does not respond to the remote control. I have replaced the batteries in the remote control You have to unplug the television after turning it off. Take the batteries out of the remote control.
Question about Sharp LC Televison & Video
manual switch ok but remote not fundtion sharo tv Be assured that fault does not lie with the remote handset itself. In that case repair or replace it.Remote control system has two parts. One is the ...
...responding to the remote i cannot turn the tv on or off with the remote. if i unplug and re-plug the power cord then i can use the remote for 1 or 2 days..then it quits again. the tv turns on ok if i ...
...responding ot either the tv controls or the remote. It is Sharp LC-32SB24U TV Tries Unplug the tv and all devices to this tv.Replug it back about an hour later.Than goto the tv menu.Go to PICTURE go ...
Question about Sharp LC Televison & Video
...in a new motherboard and same problem persists. Sound and picture are fine All the buttons on the remote and tv seem to work except for changing the channel or when you press the ENTER button to ...
...problems: 1. Unit turning itself on/off at random times 2. Unit locking up and fails to respond to remote or set-top butons, unit must be unpluged and plug in again to get set to respond. Please ...
19 questions posted
Usually answered in minutes!
228 Questions
121 Questions
69 Questions
40 Questions
36 Questions