Dometic Rooftop RV Air Conditioner "hook 2 thermostats furnace controls" Questions

camper told us that he had a problem, too, and was told to unplug all the electric including the battery, wait 2 minutes, and hook up again. This might reprogram the circuitboard, and voila! It worked

...furnace or thermostat. Its 2 to 5 wires depending on if you have a heat pump or conventional system. If you have a control board on the inside of the furnace that has the terminal (y), then your ...

...shoud be wired to W1 amd EM Heat. If your heater is a two stage furnace then hook the thermostat W1 to stage 1 amd W2 to stage 2. Most new 2 stage heaters will control stage 2 with the control

...2 wires going outside. Yellow from the thermostat and the common wire from the lv side of the transformer. hooked up white wire from condensing unit to (c) on furnace control board and ( red ) wire ...

...2) Remve Bowler Door and find where thermostat wires connect to control board. Remove wires and write down which terminal they go to. 3)Take a wire and hook-up between R and Y. Put door back on, turn ...

hook up to my thermostat its a Honeywell, as of the moment there is no heat pump it just the air handler running. I know there was a green to orange hooked together and 2 blue wires that also were all

...hook up the White wire to W terminal if you choose. This wire is for your heat strips. With the thermstat being incorrect, the heat pump will NOT run in heat.....because the thermostat is not for a ...

...2 seconds, continually I have a carrier model FA4ANF04200 central air unit with 38xcc42-3 compressor. It was installed in 2004. I am hearing the AC unit kick on and off several times at night, almost ...

...2 going to the a/c the 24 volt hot wire for the a/c will be hook to the yellow wire coming back from the thermostat take them off the board and wire nut them together this will do the trick in many ...

...2 wires, one from the y terminal and the other from the c terminal on the control board in the Furnace to the outside unit contactor. At the contactor just hook up each wire to one side of it. At the ...