Honeywell Programmable Thermostat Heater "wires 5 wire" Questions

...5 wire t'stat with 1 transformer, the red jumper actually should have been from R to 1. So you need to trace the wires back to the furnace and make sure they go to the locations identified below. if ...

5-2 thermostat, but my current thermostat has six wires. Please advise This my situation exactly. Changing from a 6 wire manual round Honeywell thermostat to a 5 wire Honeywell programable. Is there a

...5 wires - C, W, Y, G, R On the new thermostat, theres Rh, Rc, W, Y, G I've hooked up all the wires (Y-Y, G-G, W-W, C-Rc, R-Rh) but nothing happens when I turn the power back on - the snowflake just ...

...5 Terminal Y G Rh Rc W I am not sure which wire should go where any help would be appriciated. I am disabled and can't afford to get somebody to do it. I figured I could handle it but of course wires ...

...5 color wires: W-White, Y-Yellow, G-Green, R-Red and C-Blue. The Blue wire is a common from the transformer on older systems, which is probably hooked to RC terminal. Try this: Remove the blue wire ...

...correctly????/Wire for Wire???? If so if you have 4 wires in your thermostat you require a jumper wire between RH & RC....if you have 5 wires...no jumper is required....is the Furnace power

5 wire Trying to replace thermostat. Had a Honeywell 7 wire setup, trying to go to TH 8000 5 wire. Had it hooked up and the heater worked. Tried to turn the AC on and it won't work. WTF is the deal? I

...HAVE A 4 - 5 WIRE THERMOSTAT AND ONLY A 2 WIRE HEATER WHICH PINS DO I HOOK UP? fOUND AND FOLLOWED AN ONLINE DRAWING AND IT WORKED. THANKS! The two wires from your heater go to R or red and W or

...5:00 AM See if there is some sort of reset control. U may not have programmed it but I assure you it is programmed to do so. Maybe some poltergeist is responsible for the anomaly. If after doing ...

...5 wires. Other wires you may have:W2- 2nd stage heatY2- 2nd stage coolingOrange(O)- Reversing valve for heat pumps.These wires can be different colors depending on the installer that connected them. ...