Toshiba 62HM95 62" HDTV "fan lamp replace" Questions

Lamp) Fan failure 38 Excess Lamp Temperature 39 Excess DMD Temperature 41 Short Detected 44 DVI Cable (between Chassis and Engine) disconnected remove the back and lamp (make sure the lamp door is on)

...Lamp Fan Ballast Fan, DMD Fan, If they are OK then Lamp Mats has Lamps for $99.00 1-800-628-1118 You can also Look on EBay For Lamps $85.00 Encompass Parts Dirtbution Go to their website and type in ...

...lamp. I placed a regular fan behind tv facing it towards vents where lamp is to keep it cool. Worked for 8 months; replacing lamp-would really like to know if i can repair/replace fan myself. TV runs ...

...lamp fan suddenly and for several minutes going into a loud high speed mode. This is very annoying. I took great care during the lamp replacement process to avoid touching the bulb and put everything ...

...lamp or is there another fan that should be running but isn't? Possible side effects of lamp going bad are a deformed lamp exhaust duct. Lamp part # 915P049010, Lamp Exhaust Duct part # 642B155010, ...

back and make sure the lamp installation is right. also, if you did not purchase an exact replacement lamp it may be defective. If the fan is running then the chance is for a bad lamp. Hope this helps

fan motor is macking nosie and the lamp light on front panal is flashing Buy a new fan and replace it.Tries websites like Partstore.com,Ebay.com to buy a new fan for the replacement.Tv should be ...

lamp fan. Just read a post on this sight & the tec called the lamp fan #2 !! How many fans does this ****** have ?? Can anyone tell me were fan #1 is located ??? Thanks Harley hello Harley, Lamp #

...lamp cooling fan. if the fan didn't run at the correct RPM then the lamp will not get proper cooling and the lamp will get over heated. This will result in termal shutdown. And the tv will go to ...

...lamp cooling fan will continue to operate for about 1 minute after the power is turned off. Do not unplug the AC Cord from the outlet until the fan has stopped. Avoid interrupting the power by using ...