Kirby creating dirt under carpet? My Kirby seems to work too well. Since we got our vacuum we have been getting lumps in our carpet, mostly in the high traffic areas. We pulled part of the carpet up ...
Question about Dyson Vacuums
Why won't my vacuum adjust to my new carpet height? We recently got new carpet and it has a higher pile than our old carpet. When I put the setting to carpet it I'm not possible that I've designated ...
Rollers are to low and tearing up carpet. How do you adjust the rollers height so it does not tear up carpet? Vac. as well as the carpet are new. Thanks DB unfortunatly you cant adjust the height on ...
Question about Vacuums
When I vacuum a relatively new carpet I cannot push the vacuum because the suction is so strong. It works fine on my other carpets. Is there any way to adjust the suction? You probably need to adjust ...
...on the carpet, causing the belt to slip, overheat and break. If the vacuum has a height adjustment, try adjusting it to a setting which lifts it higher off the carpet. I hope this helps! Good
Powerhead won't rotate on low-pile carpet Start to smell burning when using on low pile carpet Sounds like the vacuum is adjusted too low on the carpet. Adjust it to a higher level. If this is not the
Question about Dyson Vacuums
...from moving the vacuum on my carpet There should be a height adjustment for carpet. Try adjusting it higher If your brush roll is not spinning properly it can make the vacuum hard to move on the ...
Question about Proteam Vacuums
Does the proteam proforce 1500xp automatically adjust itself for high or low carpet scenarios? (Does it have automatic height adjuster?) This vacuum cleaner has no height adjustment. You can run it ...
...adjusting the height of the wheels or brush bar. The vacuum may need higher push force on certain types of deep pile carpeting. We would recommend checking directly with the carpet manufacturer for ...
Question about Riccar Vacuums
...carpet lengths. Even with a new belt, the brush will not spin if the height is too low. Try adjusting it all the way up, then while it is running, adjust it down until there is some resistance. The ...
96 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
179 Questions