Biostar : U8668D P4/DDR/FSB 533/A&V&L/ATA133/MATX Motherboard "lan led always" Questions

Lan cable it gives me no signal by the led which is connected with the hardware.it always show the network cable is unplugged. is the cable a crossover cable You need a "crossover lan cable" to conect

led does not tur on it is always off the switch is on If the light is off it can be one of three reasons... one... it is failed and is replaceable or it is turned off by your Opperating Software or in

...LED next to the LAN (RJ45) socket also lights up. However there is no bleep and no signal transmitted to the monitor. I cannot see that there is a power LED on the motherboard. I have 2 sticks of 2Gb ...

...LED on the motherboard. Does it light up when you power on the PC? If no then the power is not reaching the motherboard. The PSU may be faulty. There is no reason for it to stop spinning. if the ...

...led or usb drive showing power even cd roms and floppy drive not showing light fan does not start even when power plug is on i m using p4 and its agp 8x/dual channel ddr Hi, the most likely place(s) ...

...LED on MOTHER BOARD also glows, my PC's turn off automatically even if i am present in BOOT SCREEN OPTION is it 'motherboard problem' ?? I missed your question, anyways. as it seems there ...

...always, lan port blicks. Since Pico PSU does not have 12 V 2x2 connector, I used adapter (peripheral to 2x2 model adapter, my multi-meter shows 12 v available form adopter). Any clue what might be ...

LED lights were on at once they would use less than 1 Watt of power. 2) EACH fan uses 2 to 3 Watts of power. 3) A typical Processor can use 51 to 125 Watts of power. AMD Athlon X2 5000+? Can use up to