XM Radio (XMP6000) "bad sound" Questions

...sound? If not, bad TV input. If you do get sound on that other channel with a single RCA, then you have either a bad cable or bad source. Reverse RCA's on source and try same test, plugging each RCA ...

...sound? check your wiring for shorts or nicks, you may have a bad speaker which has low resistance when the volume is turned up also. check to make sure u dont have a bad speaker, then go and recheck ...

...is on 0 as i press the volume and when i scroll through the styles of sound is on 0 as i press the volume and when i scroll through the styles of sound You have a bad ground. Or bad groun in the

sound on either radio or cd. I have checked for any bad connections and can't seem t Hi there I have alpine cda 9856 cd player and it turns on and does every normal however it won't output

bad unit. Sound is produced by the amp in the radio. It could be bad or you could have a blown speaker. Sometimes if a speaker blows it will act like a ground causing you to lose sound. Check all your

lights up no sound go into curve i have sound out of the crouve no sound Sounds like a bad connection. Check the harness by moving it around, you should be able to fins the problem pretty easily.

sound was crackling for a month or more, then no sound at all now. sounds like you may have a bad output ic.

...sound was fine next time I turned it on speakers reverbatate I checked all the wiring yanked on it some maybe the speakers are old and they broke Sounds like interference just a bad connection bad ...

...volume up all the way to barely here any sound. Then it pops and crackles By no means is this a solution, only a comment - Internal Amplifier is bad. Check your wiring before installing another

will turn on but no sound check your speaker wires and speakers for shorts to ground. you can try disconnecting one speaker at a time. if no shorts or bad speakers, you may have a bad output ic.