...one channel or the other, not as 2 seperate channels If you are saying that it only works on say the left channel in stereo mode, but both channels come on in mono, then there's a fault in the ...
...one channel working. Only high static and scratchy music comes out when turned up on single channel. Problem happened before about five years ago. Cleaned unit but could only turn knob up 3/4 on that ...
One bad channel One channel plays properly. The other one is faint and distorted. The product is actually a preamp. The thing with stereo amps is that they are actually two mono channels put together,
Question about Bryston Audio Players & Recorders
...channel, and you find a short on one only, replace the other to be on the safe side. How old is it? Bryston has a 20 year warrantee on its products and does an outstanding reasonable proced job of ...
One channel dead - Aiwa NSX-D5 (RX-N5K amp) One channel dead on the output at the back. Headphones have both channels fine. Double checked with both speakers on both outputs. Speakers are fine. Left ...
Question about Crown Audio Players & Recorders
...one channel only? Also, Are schematics available? If you turn up the faulty channel and you can hear nothing, then it could be the pre-amp that's gone, otherwise it could be the power amp. The most ...
...One per channel 3-pin female XLR connector and TRS ΒΌ" phone jack accept balanced or unbalanced signals. 3-pin Phoenix-style connectors (2-channel models only),One per channel, accepts balanced or ...
...One channel out and already resoldered bad connections! This one is a beast!!! When dealing with stereo amps you should treat them as two mono amps joined together. So if one channel is dead you can ...
one channel does not power up Hi. This amp has two discrete channels. Channel one is fine, on second the protect light stays on and the SMPS for the rail voltages does not start. The so called ...
ONE CHANNEL WORKS ONLY ONE CH WORKS As stereo amps are two mono ones put together you can use the good channel as a guide to tell you what the bad channel is not doing. You just need an insulated tool
19 questions posted
Usually answered in minutes!
17 Questions
16 Questions
9 Questions
1 Questions
6 Questions