...nothing was connected to the surround terminals the E-6 error happed on auto-setup. I eventually fixed this by connecting the rear speakers to the Surround L/R terminals and then, via the manual ...
my kenwood receiver has very low sound in the back im mad! i want it fixed If you are referring to the rear speakers, it is normal. The rear speakers are not supposed to get a signal as loud as the ...
...give any sound either but have turned the levels right up on these and that seems to have fixed it advice appreciated! It sounds like you don't have your surround sound source set up ...
...surround sound, multi stereo etc. please help Hi amstok Sounds like it may have a DSP failure. Straight stereo signals bypass the DSP stages. Could be an expensive fix. I suggest you take it to a ...
...what the possible fix might be? Remember the rear speakers are called surround... Did you select surround on the unit? if it says stereo then you will only get fronts, select surround to get the
Question about Yamaha Audio Players & Recorders
...receiver is reading. You would have to manually set your receiver to decode the signal into surround,. hi, I live Chile and I have a htr 5930 but the surround dont work, how fix this mistake ...
Question about Onkyo Audio Players & Recorders
...components were damaged. If you are still covered by the warrenty, then you may be able to get it fixed at no cost. Otherwise get a qualified technician (I say this to cover my but rather than ...
surround sound I have to turn it very high so I can have it just at a normal sound. how can I fix this? The issue is most likely how you have it connected to the set. You need to tell us what the make
Question about Pioneer Audio Players & Recorders
...but outputs set to 5.1 surround. One quick solution is to switch to "movie" mode and see if that fixes it. The problem may also be that the receiver is switched to "analog" mode but you're seeking ...
Question about Harman Kardon Audio Players & Recorders
...surround from HD channels , espn etc HDMI cables contain both your audio & video in one cable. Remove your optical cable from the box and disable in in the cable box menu and that should fix your ...
66 questions posted
Usually answered in minutes!
135 Questions
96 Questions
101 Questions
78 Questions
82 Questions
