Nikon D50 Digital Camera with 18-55mm Lens "clock error" Questions

Ad

Question about Nikon D Cameras

2 Answers

...error' and 'clock' message Hi, My D80 is not working. It turns on, but none of the functions are working. There is a flashing 'error' message and 'clock' message on the display screen. I am using it ...

Ad

Question about Nikon D Cameras

3 Answers

...Clock. I looked inside and saw the mirror was stuck up. I simply pressed the shutter to take a picture and it reset and the error went away. The "ERR" code usually refers to an aperture problem. For ...

Ad

Question about Nikon D Cameras

1 Answer

this error was caused by a dead internal "clock" button battery. Fixing it required simply replacing the battery. But before you attempt to do that, would first suggest trying a different memory card

...timeout error. Perhaps you look in the manual from page 119, where all error messages are, to see what the camera tries to tell you. there are a lot of warnings and errors with a little clock

Question about Sony Cameras

1 Answer

...error in DSC H2 recently purchased. I found that the internal battery which controls the clock had discharged. So i allowed the batteries to remain over 24 hours and it became ok. No more problems. ...

Question about Sony Cameras

1 Answer

...working do not worry follow the steps again two or three more times, As this is generally a software error message and not a hardware malfunction. If it is working then don't forget to set your

Question about Nikon Cameras

1 Answer

Error clock R49 error on Nikon D80 this error message is usually caused by a low battery. Here are some steps you can try to fix the issue: Remove the battery from your camera. Fully charge the ...

Question about Sony Cameras

2 Answers

...Clock. Hi, Error code E:91:01 flashing on lcd shows problem of flash board in DSC-W55 camera. If initialization/ reset does not remove error code flashing then flash circuit board will be replaced to ...

Question about Sony Cameras

1 Answer

...worry follow the steps again two or three more times, As this is related to a software error message and not a hardware malfunction. If it is working then don't forget to set your Clock. Thank you

Question about Moultrie Cameras

1 Answer

...locked;7=SDcard damaged;8= comms error)last digit,000006=Clock Test(0=pass;9=fail). Are you sure this # is not preceeded by an "E", WOULD BE # OF EVENTS SINCE THEY WERE LAST CLEARED. Ron

Not finding what you are looking for?
Nikon D50 Digital Camera with 18-55mm Lens Logo

149 questions posted

Ask a Question

Usually answered in minutes!

Top Nikon Cameras Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Nikon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...