Vulcan EF3 Deep Fryer "pilot stay lit" Questions

...Pilot will not stay lit. Second fryer has larger pilot have no trouble keeping it lit. How can I adjust the pilot so that it will stay lit? there is a small adjustment screw on the gas valve,turn it ...

...stay lit while the pilot button is being pushed. You can relight it serval times and maybe get it to stay lit, but after a few cycles it will go back out , again when you first light it before cooker ...

pilot does not stay lit When I light the pilot it does not stay lit clean pilot light first , you may need to change thermopile or thermocouple see what mille volts you get from thermopile need ...

pilot will not stay lit after releasing the pilot button. The gas valve was recently replaced and now the pilot will not stay lit. If it has a thermocouple you should check it next.

...pilot light will not stay lit. I have replaced the thermocouple and still will not stay lit. Can the valve be bad? Make sure the thermocouple is deeper into the flame of the pilot light. It needs to ...

Pilot light will light but won't stay lit How do you clean the orifice? I don't think it is the ortice it is most likley the thermal coupling change it and this will keep your pilot light will stay ...

pilot won't stay lit goes out when you release button pilot will not stay lit Try replacing the thermocouple.

...and the pilot flame does not stay lit, you have to replace the gas valve. If the thermopile is glowing red and the voltage generated does not reach 500 millivots, you have to replace the

...stay lit for about 5 min. will then go out and must start over Check the gas pressure, it must meet the standard gas pressure written on the nameplate. Check also the quality of pilot flame, poor ...

...pilot will only stay lit when the water heater needs to turn on. after it heats the waer it will go out again. I understand it that once the main burners go off, after the thermostat is satisfied ...