VAX Appliances Vax X5 Bagless Upright Cyclonic Vacuum "brush noise" Questions

Brush makes noise when engaged, I put a new belt on, it still makes noise. Hoover savvy u8173.900 You don't say what kind of noise, but if it is a bumping noise or squealing noise, make sure both ends

...noise. Thank you Take the sole plate off the brush bar (with a coin or a screw driver)compartment and check for blockages near the brush bar and make sure the brush bar spins round freely. Its sounds ...

...the brush roll motor making the noise. Remove the brush roll & belt and turn both motors on. If you do not hear the noise when both motors are running the noise is likely coming from the brush ...

...then. Replaced belt. Still so loud it hurts my ears! Clean filters, new belt, bin is empty Could be the brush roll, remove brush roll and see if noise is still there when brush roll motor is

...when the bottom brush rotates. Remove the bottom cover plate and rotate the brush by hand. Look for things that make noise like stones caught in the brush path, bad brush bearings, bad drive

...brush release buttons at the same time. Turn the cleaner on and see if the noise persists. If the noise stops with the brushes removed, you will need to replace your brushes. I have included a link ...

...brush part, but I get this horrible noise. I already followed the video and cleaned the brushes see details above The horrible noise may be something wrong in the brush bar assembly preventing the ...

noise when brush roller is turned on dirt is being picked up ok, but a loud noise is heard when the brush roller is turned on. It sounds like the brush is hitting something Inspect the area around the

...brush makes noise on canister model Already cleaned brush and pressed reset button, brush not turning before, works now but making loud noise Make sure bearings spin freely. If brush roll is not ...

...noise. Brush seems to be hitting sides of vacume. Brush no longer fits tight. When I use a penny to latch the brush into place there is still quite a bit of movement. This seems to be the source of ...