Hoover F5837-900 SteamVac Supreme Wet/Dry Vacuum "low suction" Questions

Ad

Question about Bissell Vacuums

2 Answers

Low Suction/No Soap My Bissell 7901, does not dispense the soap and the suction is very low. Check the seal at the bottom of the dispenser, it needs to be on the valve not sitting in the hole, part ...

Ad

Question about Electrolux Vacuums

1 Answer

low suction I have an Electrolux central vac that is approx. 11 yrs old. the suction is very low. this started about 1 week ago. I checked the hose and it is clear. I also went into the attic and ...

Ad

Question about Rainbow Vacuums

2 Answers

Low suction My old rainbow seized up. I purchased another one on e-bay. It works but it has a broken latch on the side and it has low suction. Even when I press down so it is sealed to the water can ...

Question about Rainbow Vacuums

1 Answer

low suction My 2001 machine is has low suction. The motor sounds fine what could this be? Is the suction low at the tank after you disconnect the hose? If it is strong there, then the hose may be ...

Question about Hoover Vacuums

2 Answers

low suction I have a Hoover central vacuum system. I've reset the fuse box, checked the fuses, all of the lines are clear and there are no holes for escaped air to travel out. The filter has been ...

...suction low! Attachement works, no Brush turns....suction low! Attachement works, no problem. Check for a blockage between brush and entry into dust chamber, if something has not made it's way to the ...

Why is suction not properly working,? Suction very low This could be because the power voltage is either too low or high. Check voltage compatibility... Or because there is a blockage.

...low suction on vacuum cleaner. No blockages detected. Changed bag. Also red bag meter not reading. Is the suction low or ok at the vacuum without the hose attached? If it is ok, then there is a clog ...

Question about Vacuums

2 Answers

low suction Have a Powr-Flite PF 18, suction is good at motor, but low at where hose comes out of top of vacuum. Could new lid seals help the problem? Where can I get new seals for this model. Also my

use it. You may have a clog in the hose. Unhook the hose and see how the suction is there, if ok, then check the dirt inlet by the brush roll. If suction is low at the hose, then there is a clog in it

Not finding what you are looking for?
Hoover F5837-900 SteamVac Supreme Wet/Dry Vacuum Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...