Hoover SteamVac F5914-900 SpinScrub Upright Vacuum "stopped sucking" Questions

I HAVE A MODEL 125 12008 CRAFTSMAN 16 GALLON SHOP VAC. MY PROBLEM IS THAT WHEN I'M DRY VACING ABOUT EVERY MINUTE OR SO THERE I WILL HEAR A CLUNK AND THEN IT WILL STOP SUCKING. I HAVE TO TURN IT OFF ...

doesn't return the dirty water to the tank, after apply the water My Bissel has been having problems sucking the dirty water back into the tank. It's like it works for half a dozen uses and then just ...

...stopped. So I cleaned the filter well and replaced it but still the suction is low. It's sucking into the vacuum tube but not into the bucket. So I tried the blower, and it's barely even blowing out ...

stopped+vaccuuming+and+started+blowing .. If your shop vac is blowing out instead of sucking in, this means the hose has been reversed. Just pull the hose off the nozzle and reattach it to the suction

stopped sucking? My brand new Hoover React vacuum was working fine the first 2 times I used it. Now it will turn on but the suction is nil and the rollers don't move and there's nothings tangled up in

after my son vacuumed up maybe a lego theDiamond G Kirby started sparking from inside housing. We took brush and checked for any loose items and found none. Any ideas and can I diy? Sucking up a Lego ...

...some reason has stopped sucking up, what do I do ? I HAVE CLEANED OUT PUT FRONT BIT ON AND OFF TO MAKE SURE ITS INSERTED PROPERLY BUT WITH NO LUCK something is blocking the way of air, try to remove ...

Suction cuts out how to fix. Vacuum pulls water for about 20 to thirty seconds and then the suction cuts out. Drain the vacuum each time. A ball inside the vac stops the flow before the water level ...

My Bissell pro heat 2x ( model #8920) attachment tool had no suction and the manual had no instructions on how to fix this problem?! Check the valve at the bottom of machine is closed. It bay be stuck