Hoover H3030 FloorMate SpinScrub 500 Upright Wet/Dry Vacuum "water pipe trigger" Questions

Ad

Question about Vacuums

1 Answer

...before? if so then you could have a blockage from the outlet (where the pipe connects to the water tank which model do you have ? and was the filter present when you was working with the trigger

Ad

Question about Hoover Vacuums

1 Answer

...how to fix it Check the machine where the water tank is installed, you will see a pipe stem this stem should have an o-ring gasket on it. also look at the plunger in the tank for proper

Ad

water in switch it on red lights come on then go blue I will turn on steam and it will just not steam. Lord Blake there sounds like there is a problem with the trigger or the seals for the steam pipe.

Question about VAX Appliances Vacuums

1 Answer

...water should be added and a capful of floor cleaning solution. Then remove the pump wire on top of the Vax motor where the blue filter circle is (keep the filter in, do not remove it!). If the 2000 ...

...pipe from the bottle to the motor. You can also have a blockage from the pump to the dispenser nozzles and can test this by taking off the top cover and taking the plastic tubes off them to see if ...

...and holding the water until plunger is pressed back in a gain for the water to flow down the pipe again if this is the case rebuild the machine mine now works perfect.hope this sorts your problem ...

Question about Polti Vacuums

1 Answer

...pipe you should be able to remove the valve from the top remeber that the water is now steam so it is very hot and will burn you so be carefull when opening the valve when hot I think that you will ...

...pipe / tube connections one may have broke or com loose. check seals Some cleaners have check valves that only open when water pressure is applied . If the valve is bad the cleaning solution will ...

Question about Bissell Vacuums

2 Answers

...trigger, no water. I took it apart but failed to see anything that looked wrong. Any ideas? I have a similar model and occasionally have problems with water/detergent flow. I find it is generally due ...

...remove the hand tool and manually wash it select the tools cleaning option place the tube in a bowl of clean water and allow it to **** the water up - this should clean out any blockages in the

Not finding what you are looking for?
Hoover H3030 FloorMate SpinScrub 500 Upright Wet/Dry Vacuum Logo

84 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...