LG Studioworks 45 14" CRT Monitor "supply" Questions

power supply ok. but 110v missing. power supply ok. but 110v missing and 13v missing check all fuses...if they are okay...chances are you have a bad component somewheres I.E. Capacitor or Transistor, ...

fqpf 10n20c mosfet blown continue in +B supply in +B EHT supply mosfet FQPF 10N20C over heat& blown monitor is dead no led pls change the eht

to catch signal .always blingking...after along time it may be or not. You need uninterrupted power supply to your computer so that it will not blink. Use AVR power supply to regulate the source

power supply get dropped what all compoments should be checked what power supply do you mean Sir/Ma'am. is it the AVR (automatic voltar regulator)? if its the AVR, just switch it on and check the ...

...is required for replacement check the resistor that supplies the vertical ic this must be open the supply of the vertical ic comes from the plyback replace the resistor connecting to it.. pls rate

...monitor led is blinking and makes sound tiktik plz give me solution It sounds as though the power supply for the monitor has a problem - it may be a capacitor that is failing. It is obviously

...to replace eht when there is no raster. you please go as per procedure. check output from power supply if is ok check horizontal section if it is ok or eht ok then check for heater glowing check ...

problem half screen from above not appear,fold at center. 1. problem in vertical section . 2. Vertical IC supply capacitor problem. 3. Drypoints in Vertical IC saroundings. 4. vertical IC problem.

filament voltage. Horizontal transistor. 2. if filament voltage is not comming ,change the filament supply diode, capacitor. 3. incrize the brightnes ( LOT Screen ) 4, dry points in neck board

set dead power supply failure hi there, power supply prob., test first the fuse, then the rectifier diodes, the regulator and resistors. do some check up at the power supply section. ty