...using? this is a sure sign of chain overheating , due to not enough oil to bar , this will eventually cause bar to wear down and chain to not stay on ck your oil pump and oil tank for proper ...
...chain wont stay tight tried everything new bar with tightener on bar still didnt help chain loose within seconds to minuates most time comes off the bar Take a link out of the chain. Had the exact ...
Question about Garden
timing chain broke installed new one starts but wont stay running at idle speed You've asked this question in the 'chainsaws category' Chainsaws don't have timing chains.!
...chain won't stay tight. I have to retighten it every few minutes. This has just started happening. Any ideas? Sounds like the chain oiler is plugged up and the chain is getting hot and
...chain saw will not stay running after i sta... Poulan chain saw will not stay running after i start it. What are the carb settings ? Hello, a good starting point is the low speed screw at 1 3/4 turns ...
...of cuts Changed to oregon chain. Didn't make any diferance. Can't get it to stay tight. i would look into the oil pump for the chain bar oil overheating will do a lot to a
have a 20 inch poulan pro with the tooless chain tenshioner and chain wont stay on saw If the chain is staying tight, your bar might be bad
chain dowsn't stay tight Between the chain bar and the body there is an adjusting screw, if the adjusting screw is stripped it will not pull on the chain bar to tighten the ...
...chain will not stay on it. I have done everything I know to fix this,including taking it to a repairman. The repairman said he could not fix it. Now I have a new chainsaw that I can't use and is not ...
...use? Never drain the chain oil - it is unnecessary. Thanks Gary @ Fix Ya No. The oil is supposed to stay in. Just top it off before you use it again or after each use so the chain will be
2 questions posted
Usually answered in minutes!
311 Questions
93 Questions
31 Questions
30 Questions
