Roper RGX5635E Dryer "gas getting hot" Questions

...gas dryer won't get hot gas--- glo bar that lights the gas is bad or the vent to the outside is clogged electric-----wire may be burnt off the heating element or element has to be ...

...Gas dryer ignites when I first turn it on and gets hot but won't stay hot or ignite again. The burner come's on and it lights and get hot when I first start it up, but after that there's no heat. ...

gas dryer get hot ? the dryer doesn't get hot There are a few reasons why your dryer may not be getting hot. A bad thermal fuse, a bad ignighter, or a bad flame sensor. Least likely would be a bad gas

gas dryer replaced flame sensor and still not getting hot We replace the flame sensor and the flame turns on but the dryer does not stay hot replace the gas valve coils on the top of the gas valve ...

...not hot enough to satisfy the flame rectifier. It would light the gas then go out. This was soon after changing the coils on the gas valve. If it doesn't glow almost white hot the gas won't stay

hot and I hear the gas valve click and as soon as the gas vavle clicks the ingintor goes out and the dryer does not light sounds like its your coils on the gas valve failing. replace the coils for the

hot. My gas dryer will not heat, what could stop my dryer from heating? A - Things that could stop a gas dryer from heating: - glow bar igniter, thermal fuse ( not all models ), coils on the gas valve

...hot now what do i do now. my whirlpool gas dryer is not getting hot. I already replaced the ignightor and still no heat. Have you checked the gas valve to make sure that it is functioning

the gas valve on all LG's. But if your getting heat all the way through the cycle then I would check your venting and make sure its not restricted. This will cause long dry times. Hope this helps. _MJ

dryer won't get hot. It's a gas dryer, it starts and the time dry cycle runs the correct time. It just don't get hot most likely the glow plug is not heating to ignite the gas