Frymaster Dean MJ35-SC-1 ''Standard'' Deep Fryer "lighting pilot" Questions

gas is on pilot won t light Hello there: The problem you mention is not that clear. The pilot won't light or the pilot lighted but won't stay on is two different problems. If the pilot won't even ...

Pilot light won't stay lit The pilot light wouldn't light. I replaced the thermocouple, now I can get the pilot to light, the pilot/heat will start, then after 10 minutes or so, I have no flame or ...

...it Pilot assembly is located between the two middle burners, this is where the pilot is lighted. You have to turn the gas valve knob to pilot position then push it while lighting the pilot

The burners will not light. The pilot does light. I had my staff try to hit anything that looked a reset, but I don't know if the high limit switch has a reset or if the switch itself is bad. The ...

Pilot wont light. Only second time I have lit the pilot. Wont light. Is there an adjustment i am missing??? Thanks Firstly make sure the gas knob is exactly in the pilot mode some are finiky and won't

pitco fryer i have a pitco fryer 4 vats first one light other three pilots light one will not light at all just pilot other two will light and go back out. when you flip swith you can hear the igniter

i have a 3 burner pitco gas friolator and dont know how to light the pilot any suggestions First, never light when the pot is empty, you can fill with water if you have no oil. Open the door, check ...

...pilot lighting instructions on the inside of the door. If yours doesn't then find the gas valve, turn the knob to the pilot position, push in on the knob and light the pilot. Keep the knob pushed in ...

Pilot light won't stay lit. Ensure that gas is getting to the pilot , or you may have a devective pressure regulator. If gas is getting to pilot and pilot is turning off, then you need to replace the ...

Pilot Light Pilot light will light, burners ignite and fryer comes up to temp., the burners go off and the pilot light stay on, but when the burners start to ignite again the pilot light goes out and ...