Mamiya RB67 Pro SD Medium Format Camera "shutter open" Questions

...fire the shutter with the camera open/back off, pointed towards a light source, if the shutter opens you will see the light thru the shutter/lens. If no light is seen then the shutter is

...open) Lense shutter closes When releasing button, curtain closes When winding, lense shutter opens If this isn't what's happening, something is wrong. There is only a simple mechanical screw ...

...open the shutter and checked the magnets and they look clean. And my battery is not dead. If you opened the bottom you saw the magnet that holds the shutter /mirror mechanism closed- sometimes it and ...

...shutter speed), open the back and fire the shutter on Yellow 2 (half second), you will see the slit is fully open as the lens swings. Next try Yellow 8, you will see the slit is less than half open, ...

tar oozes down and gets onto the shutter blades, causing them to stick. This results in the shutter either failing to open altogether or opening too slowly, resulting in blank or unexposed photographs

Shutter stuck open/mirror locked up The shutter stuck open after I shot a scene, the camera made a really odd noise, and would no longer function correctly. I am using a Kodak DCS back on it, but even

the shutter open the lense and push shutter button , rotate the camera mode to auto or manual release shutter.donnot set on bulb or lower speed can cause stuck camera miror and stter curtain, or blade

...open. Load a film and fire the shutter a few times each time with winding on, to see if film is winding correctly, at the same time you should be able notice if the shutters are firing, eight of them ...

shutter open for the correct amount of time. (This was confirmed by Johnsons Photopia on the phone). This will mean you may have set a slow shutter speed of say 8s but the actual speed you get will be

...shutter by: 1) open the film door 2) While looking into the camera, press the shutter button. The shutter should open and then close. If the shutter doesn't open and then close, it could be stuck and ...