Question about Linksys Computers & Internet
reset it up Here's what you need to do 1) hardwire the modem-router-desktop (note: modem should be connected to the internet port of the router and connect desktop to port 1) 2) press the reset button
...Note: This would also reset all the router settings back to factory defaults, including any settings that were configured for your internet connection. You would need to reconfigure these. Hope this ...
Question about Linksys Computers & Internet
reset button. Press and hold for 10 sec ... The let sit for a min or 2 then try logging into it.. Note: That the router will have to be setup again. Default login admin for the password .. don't enter
...reset button is built into the rear panel. Use this button to restore the factory default password to 1234; IP address to 192.168.1.1, subnet mask to 255.255.255.0 and DHCP sever enabled with a pool ...
step to Reset the router) Note: Resetting the router will erase all the settings so it needs to be reconfigured afterwards. The router can be reconfigured using the setup CD or by manual configuration
Question about NetGear Computers & Internet
step to Reset the router) Note: Resetting the router will erase all the settings so it needs to be reconfigured afterwards. The router can be reconfigured using the setup CD or by manual configuration
step to Reset the router) Note: Resetting the router will erase all the settings so it needs to be reconfigured afterwards. The router can be reconfigured using the setup CD or by manual configuration
step to Reset the router) Note: Resetting the router will erase all the settings so it needs to be reconfigured afterwards. The router can be reconfigured using the setup CD or by manual configuration
...Reset the router) Note: Resetting the router will erase all the settings so it needs to be reconfigured afterwards. The router can be reconfigured using the setup CD or by manual configuration. port ...
Question about NetGear Computers & Internet
step to Reset the router) Note: Resetting the router will erase all the settings so it needs to be reconfigured afterwards. The router can be reconfigured using the setup CD or by manual configuration
12 questions posted
Usually answered in minutes!
1,358 Questions
703 Questions
590 Questions
517 Questions
494 Questions