Harman Kardon AVR 130 Receiver "repair harmon" Questions

...harmon kardon avr 165 it shows ''Protect'' and then it turns off again?? what can i do :) I would try disconnecting the speakers, then turn it on. If protect still shows with no speakers connected, ...

monitor output signal HDMI monitor output is not working. What is the repair solution? Email or call the manufacturerhttp://www.harmankardon.com/EN-US/Products/Pages/ProductSupportDetails.aspx?PID=AVR

...the only thing about it is that its D788 in a Harmon-Kardon AVR 335 D788 is a zener diode rated 5.6V 1/2W, part #HVDMTZJ5.6BT. It shouldn't be too hard to find one of those. Good luck with the

...results. protect usually means there is a short in the amplifier circuit that will need to be

Harmon Kardon AVR 5 plug in and turn main power on, secondary power will not turn on just clicks Assuming that the system is properly installed and was working ok before, the problem is usually a ...

Speakers crack when I turn up volume. From my experience it probably means there is a tear in the speaker and the sound gets distorted when you turn the sound up. There is not much you can do for this

...repair person. Sometimes there are capacitors in the power amp circuit that can hold a lot of voltage for a good length of time. You could get shocked. So, you might want to let the repairman handle ...

harmon/kardon reciever they sounded great everything was working well i left the room for a drinkwhen i got back there was no sound checked the wiring the speakers but still no sound coming out of the

...fixing? all other channels work fine anything that works well is always worth investigating for a repair it could be a simple fuse for that side amplifier, loose , broken speaker wire have it ...

harmon kardon hk3270 shuts off after only being on about 10 sec brand new looking receiver/amp inside & out. Does put out sound but not for very long about 10 sec. seems like its heating up even ...