Harman Kardon AVR 135 Receiver "slow" Questions

I have an Yamaha r-50 the main slow blow fuse was I have an Yamaha r-50 the main slow blow fuse was shot - I replaced, now it powers up but no audio. I think it got hot. the audio amplifier IC fried

Does The Onkyo TX-8210 take a slow blow or fast blow fuse? slow blow (aka time delay) fuses are used in motor circuits. Electronic devices use normal or fast blow fuses

tx-nr609 remote is slow to respond the guide control is slow but the volumne and to change input are fine Try fresh batteries, might make all the difference.

...know they were different amperages and now don't know which go where. F101 is 8 amp / 250 volt slow blow F103 is 315 mA / 250 volt slow ...

slow tape speed on reel to reel tape deck The tape runs approximately 10 % slow. Their is no mechanical issue with slipping or jamming on any other such issue that would slow doanw the motor. Can the ...

my harman kardon avr 520 shorted out. i see 2 fuses blown 1 slow burn 7a 250v slow burn & 1 slow burn 2a 250v 5x20mm. Is this a good place to start fixing it? i had metat to metal shorting because

Nakamichi BX-2 will play a tape for 30 seconds but takeup reel doesnot function will REW slow and FF slow ...Ihave a new drive belt but it looks like a motor is not working with the worm gears WHAT ...

HELLO I HAVE 670ZX WITH OLD STYLE VU METERS. EVERYTHING WORKS GREAT EXCEPT THE VU METERS ARE SLOWING TO A STOP ALMOST. THERE IS OUTPUT ON BOTH CHANNELS AND IT SOUNDS GREAT BUT...........METERS ARE ...

Receiver had blown 4A 125VAC fuse; is this a fast acting fuse or a slow blow type? Will it matter if I use a 250VAC 4A instead of a 125VAC fuse? Yes you can use a 250 one. It's the amps that's ...

Pioneer 74txvi fuses (fast or slow) burning Pulled the fuse, but I can't tell. If there is nothing left inside the little glass tube, it's a fast blow. A slow blow fuse will usually have a spring and ...