1995 Volkswagen Polo 1.4 "timing marks dont line right" Questions

...timing marks on a polo 1.6i 2001 model. I had coil problems and never new about it. Then I though its timing and checked the timing, it seemed to be wrong but now when I set the cam on the t/o mark ...

timing its easy there are 2 marks on the inlet and exhaust camshafts which should line up next to each other in the middle, ie straght line thru center of cam wheel bolts and marks together. the crank

...cover back plate at those two spots, those will be the timing marks. You will notice the cams dont spring into those positions on every turn, that means they are not on the right stroke to set

...timing marks just right or you could do some serious damage to the engine.You must turn the engine by hand with a socket or spanner on the bottom pulley until the mark on it is lined up with the ...

...TIMING MARKS ON THE CAMS HAS TO MARKS ON THE COVER THE LEFT CAM GOES AT 12:00 THE RIGHT CAM MAKE SURE THE EXHAUST LINE LINES UP AT 12:00 OTHERWISE IT WONT START BECAUSE YOU DONT HAVE NO COMPRESSION I ...

...marks line up,there are notches on the timing belt backing plate and they match the marks on the cam sprockets,now thew cam all the way to the left is 1 then 2 and 3 and 4 being all the way to the ...

...timing marks and holes line up ,when turning engine over by hand u can here valves clicking on cam on drivers side head.cam not set right ? turning by hand does not put any oil to them and will make ...

Timing marks on cam sproket and crankshaft pully 1996 Elantra 1.8 My car is a 96 Elantra. I replaced the head gasket in my engine without pulling the engine out of the car. I dont have an engine hoist

marks on the engine case for the valve timing to work right. Pull the spark plugs so you can turn the crankshaft easier (BY HAND ONLY) Mark the wires to reinstall correctly. I did this a long time ago

...right book i have a 1994 PONTIAC GRAND PRIX AND I NEED A DIAGRAM SO I CAN LINE UP THE MARKS. THE TIMING BOOK I HAVE SAYS NOTHING ABOUT WERE THE TIMING MARKS ARE there should be dots on the timing ...