2006 Ford Freestyle SE "clock car radio keeps going" Questions

...radio asking for key code i conect it clock is ok if i tuch button search just keep search never stop and vol button if i tuch it i didnt see any moviments The radio code is usually in the back of ...

radio turns on but won't keep the tuner presets or clock, what am i doing wrong... You have a power wire going to your on off switch you should also have a power going to a memory wire to keep

...clock don't work My son borrowed my car and "somehow" the battery died and needed a jump. The clock blinks and the radio doesn't work. I bought this car used with no owners manual. Any ideas ?? Hi. ...

...car keep blowing and the clock back light keeps going on and off some times staying off for days the switches have been replaced by my local suzuki garage but to no avail they seem to be lost and ...

...radio doesn't from the buttons on the steering wheel ? The clock spring inside the steering column could have an open in the wiring ! The clock spring allows you to turn the wheel from full left to ...

...clock keeps stopping I took car to dealor they charged me $130 to tell me it was a fuse. well then my radio worked for a week and I found out that a fuse keeps going out it is a 7.5, marked for accs. ...

...clock and radio fuse keeps blowing not long after being replaced.Thanks in advance for your help. I would suspect that either the radio or the clock has become defective. I suggest unplugging the ...

Radio, clock, cigarette lighters not working i recently installed a new radio deck, which has been working perfectly for a few months now. but yesterday, for no reason, my radio, factory clock, and ...

...clock reset to 1:00. After replacing the Car battery, the problem when away I replaced the battery and the starter in my Lexas RX 300 but it still drags when I start the car and also the clocks ...

...radio/clock all presets on radio usually go out to, look for blown fuse. Yes, GMC has left a key operating step out of the Owner's manual. IMAGINE THAT!!! After following instructions from manual and ...